Top
Products
Products

Profile grinding

  • 30MP-136T-430W
    outside dia.: 4,140mm, 8.3ton
  • 30MP-136T-430W
    outside dia.: 4,140mm, 8.3ton
  • 27MP-37T-750W
    outside dia.: 1,053mm,
    Shaft length:3,500mm
  • 14MP-272T-140W
    outside dia.: 3,970mm 1,600kg

Kamwaltz

  • 45MP-28T-950x2(+100)W
    SNCM439 Quenched and
    Tempered 33.4ton
  • 45MP-28x28T-950x2(+100)W
    SNCM439 Quenched and Tempered
  • 32MP-24T-750x2(+80)W
    SNC815 Carburizing
  • 23MP-22x22T-340x2(+20)W
    SCM440 Quenched and Tempered

Girth gear

  • 50MP-148T-550W
    outside dia.: 7,460mm, 22.6ton
  • 50MP-136T-640W
    outside dia.: 6,900mm 26,290kg
  • 50MP-136T-640W
    outside dia.: 6,900mm 26,290kg
  • 30MP-216T-700W
    outside dia.: 6,540mm 23,500kg

Large gear

  • 25MP-157T-490x2(+120)W
    outside dia.: 4,314mm, 41.6ton
  • 36MP-111T-550W
    outside dia.: 4,068mm 17,440kg
  • 40MP-101T-620W
    outside dia.: 4,437mm 18,324kg
  • 40MP-162T-450W
    outside dia.: 6,540mm, 44.4ton

Tooth contact check

  • Pinion and gear for rolling mill
    32MP-26x131T-610x2(+130)W
  • Pinion and gear for hot rolling mill
    28MP-23x154T-550x2(+170)W
  • Pinion and gear for cold rolling mill
    16MP-34x47T-475x2(+50)W
  • Pinion and gear on hobbing machine
    50MP-29x168T-600W

Bevel gear

  • Tooth contact check with gtb1250
    25MP-28x28T-165W
  • Pinion and gear for rotary table
    1.75DP-18x68T-104.8W
  • Tooth contact check with TUB-10
    30MP-33x33T-230W
  • Hypoid pinion and gear
    11.43MP-17x60T-116W

Others

  • Pinion Shaft
    22MP-22-200W x2
  • Girth gear 50MP-154T-750W
    Spring plates were set on
    the girth gear
  • Pinion for kiln
    48MP-21T-700W
  • Internal gear segment
    6MP-58(296)T-65W
↑
Page Top
Contact